Film seri mandarin. Film seri mandarin Swordsman episode 20. Dynofa Streaming Movies. Unsubscribe from Dynofa.

Requirements

You have assembled your Arduino* expansion board or your mini breakout expansion board, installed the appropriate drivers, and flashed the OS image (formerly called firmware).

Set Up PuTTY

1. Download the PuTTY terminal emulator: http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe.
2. Apply a right mouse-click on the putty.exe file and select Run as administrator.
3. Configure the PuTTY menu as follows:
   1. Under Connection type, select Serial.
   2. In the Serial line field, enter the COM# for your board, such as COM7.

      Note: If you did not identify your COM# when setting up your board, navigate to the Device Manager and check for an entry called USB Serial Port (not Intel Edison Virtual Com Port). The COM# is displayed next to the USB Serial Port entry, as highlighted below.

      
      
   3. In the Speed field, type 115200.
      
4. Click Open.
5. When you see a blank screen, press the Enter key twice. A login prompt is displayed.
   
6. At the login prompt, type root and press Enter.
7. Press Enter when prompted for a password. You should see a terminal prompt.
   

Uninstall endnote x7 mac. You have now established a serial communication with your board. You can interact with your board by entering common Linux commands. For a summary of useful commands, see Common commands for the Intel® Edison board.